Service Repair Manual |
| Year | 2000-2003 |
|
| Engine code | D7F-746 |
|
| Engine size | 1149ccm |
|
| Power | 43kw |
|
| Idle speed | 690-790rpm |
|
| Fuel system | Sagem 2000 |
|
| Firing order | 1-3-4-2 |
|
| Spark plug | Eyquem RFC 58 LZ2E
Denso K20TXR |
|
| Electrode gap | 0.9mm |
|
| CO | 0.5% |
|
| CO2 | 14.5-16-0% |
|
| HC | 100ppm |
|
| O2 | 0.1-0.5% |
|
| CO content at increased idle speed | 0.3% |
|
| Increased idle speed for CO test | 2500-3000rpm |
|
| Lambda | 0.97-1.03 |
|
| Radiator cap | 1.2bar |
|
| Thermostat opens | 89℃ |
|
| Battery | 40Ah |
|
| Alternator | 75A |
|
| Cylinder head tightening sequence | |
 |
|
| Cylinder head tightening torque 1 | 20Nm |
|
| Cylinder head tightening torque 2 | 90° |
|
| Cylinder head tightening torque 3 | wait: 3 min., slacken bolts: 1,2, then retighten to 20Nm + 200° |
|
| Cylinder head tightening torque 4 | slacken bolts: 3,4,5,6, then retighten to 20Nm + 200° |
|
| Cylinder head tightening torque 5 | slacken bolts: 7,8,9,10, then retighten to 20Nm + 200° |
|
| Spark plug Tightening torque | 25Nm |
|
| Engine oil with filter | 3.7l |
|
| Cooling system | 5.0l |
|
| Gearbox oil |
3.4l |
|
| Engine oil grade | ACEA A3 SAE 0W-30 |
| ACEA A3 SAE 0W-40 |
| ACEA A3 SAE 5W-30 |
| ACEA A3 SAE 5W-40 |
| ACEA A3 SAE 5W-50 |
| ACEA A3 SAE 10W-30 |
|
| Gearbox oil grade | API GL-5 SAE 75W-80 |
|
| Brake fluid | DOT 4 |
|
| Timing belt | 120000km |
|
 |
| Tire dimension (x/y R z) | 175/65 R14 |
| 175/70 R13 |
|
| Front wheel presure | 2.0bar |
|
| Rear wheel presure | 2.0bar |
|
| Wheel bolt tightening torque (B) | 90Nm |
|
| Front hub tightening torque (H) | 280Nm |
|
| Rear hub tightening torque (H) | 175Nm |
|
 |
| Minimal front brake disk thickness (R) | 10.5/17.7mm |
|
| Minimal front pad thickness (P) | 6.0mm |
|
