Service Repair Manual |
| Year | 2003- |
|
| Engine code | K4J-730 |
|
| Engine size | 1390ccm |
|
| Power | 72kw |
|
| Idle speed | 700-800rpm |
|
| Compression | 10.0bar |
|
| Fuel system | SAGEM 3000 |
|
| Firing order | 1-3-4-2 |
|
| Spark plug | Champion RC87YCL
EYQUEM RFN 52 LZ |
|
| Electrode gap | 0.9mm |
|
| Lambda | 0.97-1.03 |
|
| Radiator cap | 1.4bar |
|
| Thermostat opens | 89-99℃ |
|
| Alternator | 150 / 110A |
|
| Cylinder head tightening sequence | |
 |
|
| Cylinder head tightening torque 1 | 20Nm |
|
| Cylinder head tightening torque 2 | 20Nm |
|
| Cylinder head tightening torque 3 | 240 +/-6° |
|
| Spark plug Tightening torque | 25Nm |
|
| Engine oil with filter | 5.0l |
|
| Cooling system | 6.0l |
|
| Gearbox oil |
2.8l |
|
| Engine oil grade | ACEA A3 / B4 SAE 5W-40 |
|
| Gearbox oil grade | Tranself TRJ 75 W80W |
|
| Brake fluid | DOT 4 |
|
 |
| Tire dimension (x/y R z) | 195/65 R15 |
| 205/55 R16 |
| 205/50 R17 |
|
| Front wheel presure | 2.2bar |
|
| Rear wheel presure | 2.0bar |
|
| Wheel bolt tightening torque (B) | 110Nm |
|
| Front hub tightening torque (H) | 280Nm |
|
| Rear hub tightening torque (H) | 280Nm |
|
 |
| Minimal front brake disk thickness (R) | 19.8mm |
|
| Minimal rear brake disk thickness (R) | 6.5mm |
|
| Minimal front pad thickness (P) | 6mm |
|
| Minimal rear pad thickness (P) | 6mm |
|
