Service Repair Manual |
| Year | 1990-1994 |
|
| Engine code | E5F-710 |
|
| Engine size | 1171ccm |
|
| Power | 43kw |
|
| Idle speed | 750-850rpm |
|
| Fuel system | Pierburg 32 |
|
| Firing order | 1-3-4-2 |
|
| Spark plug | Eyquem RFC 52 LS
NGK BCP5ES |
|
| Electrode gap | 0.8-0.9mm |
|
| Radiator cap | 1.2bar |
|
| Thermostat opens | 86-98℃ |
|
| Battery | 40Ah |
|
| Alternator | 60A |
|
| Cylinder head tightening sequence | |
 |
|
| Cylinder head tightening torque 1 | 20Nm |
|
| Cylinder head tightening torque 2 | 97 +/-2° |
|
| Cylinder head tightening torque 3 | wait: 3 min., slacken bolts: 1,2, then retighten to 20Nm + 97 +/-2° |
|
| Cylinder head tightening torque 4 | slacken bolts: 3,4,5,6, then retighten to 20Nm + 97 +/-2° |
|
| Cylinder head tightening torque 5 | slacken bolts: 7,8,9,10, then retighten to 20Nm + 97 +/-2° |
|
| Spark plug Tightening torque | 25-30Nm |
|
| Engine oil with filter | 4.0l |
|
| Cooling system | 5.2l |
|
| Gearbox oil |
3.4l |
|
| Gearbox oil grade | Tranself TRX 80W |
|
| Brake fluid | DOT 4 |
|
| Timing belt | 120000km |
|
 |
| Tire dimension (x/y R z) | 145/70 R13 |
|
| Front wheel presure | 2.4bar |
|
| Rear wheel presure | 2.4bar |
|
| Wheel bolt tightening torque (B) | 90Nm |
|
| Front hub tightening torque (H) | 250Nm |
|
| Rear hub tightening torque (H) | 160Nm |
|
 |
| Minimal front brake disk thickness (R) | 10.5mm |
|
| Minimal front pad thickness (P) | 6.0mm |
|
