Service Repair Manual |
| Year | 2004-2008 |
|
| Engine code | G10A |
|
| Engine size | 993ccm |
|
| Power | 39kw |
|
| Idle speed | 750-850rpm |
|
| Compression | 14.0bar |
|
| Minimum compression | 11.0bar |
|
| Firing order | 1-3-2 |
|
| Spark plug | NGK BPR6ES-11
Denso W20EPR-U11 |
|
| Electrode gap | 1.0-1.1mm |
|
| Lambda | 0.97-1.03 |
|
| Radiator cap | 1.1bar |
|
| Thermostat opens | 86.5-89.5℃ |
|
| Battery | 28 / 36 / 44Ah |
|
| Alternator | 70A |
|
| Cylinder head tightening torque 1 | 37Nm |
|
| Cylinder head tightening torque 2 | 58Nm |
|
| Cylinder head tightening torque 3 | 0Nm |
|
| Cylinder head tightening torque 4 | 37Nm |
|
| Cylinder head tightening torque 5 | 37Nm |
|
| Spark plug Tightening torque | 25Nm |
|
| Camshaft drive | |
 |
|
| Engine oil with filter | 3.6l |
|
| Cooling system | 3.9l |
|
| Gearbox oil |
3.6l |
|
| Automatic transmission fluid |
4.4 / 4.5l |
|
| Engine oil grade | API SE / SF / SG / SH / SJ SAE 10W-40 |
| API SE / SF / SG / SH / SJ SAE 10W-50 |
| API SE / SF / SG / SH / SJ SAE 15W-40 |
| API SE / SF / SG / SH / SJ SAE 15W-50 |
| API SE / SF / SG / SH / SJ SAE 20W-50 |
|
| Gearbox oil grade | API GL-4 SAE 75W-90 |
| API GL-4 SAE 75W-85 |
| API GL-4 SAE 80W-90 |
|
| Automatic transmission fluid type | ATF Dexron III |
|
| Brake fluid | DOT 4 |
|
| Timing belt | 100000km |
|
 |
| Tire dimension (x/y R z) | 165/60 R14 |
| 155/65 R14 |
|
| Front wheel presure | 2.0bar |
|
| Rear wheel presure | 2.0bar |
|
| Wheel bolt tightening torque (B) | 85Nm |
|
| Front hub tightening torque (H) | 175Nm |
|
| Rear hub tightening torque (H) | 175Nm |
|
 |
| Minimal front brake disk thickness (R) | 10.0mm |
|
| Minimal front pad thickness (P) | 8.2mm |
|
