Service Repair Manual |
| Year | 1994-1996 |
|
| Engine code | F8Q-732 |
|
| Engine size | 1870ccm |
|
| Power | 48kw |
|
| Idle speed | 800-850rpm |
|
| Firing order | 1-3-4-2 |
|
| Radiator cap | 1.4bar |
|
| Thermostat opens | 89-101℃ |
|
| Ventilator turn on | 92-97℃ |
|
| Battery | 70Ah |
|
| Alternator | 110A |
|
| Cylinder head tightening sequence | |
 |
|
| Cylinder head tightening torque 1 | 30Nm |
|
| Cylinder head tightening torque 2 | 100 +/-4° |
|
| Cylinder head tightening torque 3 | wait: 3 min., slacken bolts: 1,2, then retighten to 25Nm + 213 +/-7° |
|
| Cylinder head tightening torque 4 | slacken bolts: 3,4, then retighten to 25Nm + 213 +/-7°, slacken bolts: 5,6, then retighten to 25Nm + 213 +/-7° |
|
| Cylinder head tightening torque 5 | slacken bolts: 7,8, then retighten to 25Nm + 213 +/-7°, slacken bolts: 9,10, then retighten to 25Nm + 213 +/-7° |
|
| Engine oil with filter | 6.0l |
|
| Cooling system | 6.6l |
|
| Gearbox oil |
3.4l |
|
| Engine oil grade | CCMC PD2 SAE 10W-30 |
| CCMC PD2 SAE 10W-40 |
| CCMC PD2 SAE 15W-40 |
|
| Gearbox oil grade | Tranself TRX 80W |
|
| Brake fluid | DOT 4 |
|
| Timing belt | 120000km |
|
 |
| Tire dimension (x/y R z) | 165/65 R13 |
| 155/70 R13 |
|
| Front wheel presure | 2.4bar |
|
| Rear wheel presure | 2.4bar |
|
| Wheel bolt tightening torque (B) | 90Nm |
|
| Front hub tightening torque (H) | 250Nm |
|
| Rear hub tightening torque (H) | 160Nm |
|
 |
| Minimal front brake disk thickness (R) | 10.5mm |
|
| Minimal front pad thickness (P) | 6.0mm |
|
