Service Repair Manual |
| Year | 1991-1994 |
|
| Engine code | C3G-720 |
|
| Engine size | 1239ccm |
|
| Power | 40kw |
|
| Idle speed | 680-780rpm |
|
| Firing order | 1-3-4-2 |
|
| Spark plug | Eyquem RC 32 LS
NGK BP5ESZ |
|
| Electrode gap | 0.75-0.9mm |
|
| Lambda | 0.97-1.03 |
|
| Radiator cap | 1.2bar |
|
| Thermostat opens | 89℃ |
|
| Battery | 40Ah |
|
| Alternator | 60A |
|
| Cylinder head tightening sequence | |
 |
|
| Cylinder head tightening torque 1 | 20Nm |
|
| Cylinder head tightening torque 2 | 90 +/-4° |
|
| Cylinder head tightening torque 3 | wait: 3 min., slacken bolts: 1, then retighten to 20Nm + 90 +/-4°, slacken bolts: 2, then retighten to 20Nm + 90 +/-4°, slacken bolts: 3, then retighten to 20Nm + 90 +/-4° |
|
| Cylinder head tightening torque 4 | slacken bolts: 4, then retighten to 20Nm + 90 +/-4°, slacken bolts: 5, then retighten to 20Nm + 90 +/-4°, slacken bolts: 6, then retighten to 20Nm + 90 +/-4°, slacken bolts: 7, then retighten to 20Nm + 90 +/-4° |
|
| Cylinder head tightening torque 5 | slacken bolts: 8, then retighten to 20Nm + 90 +/-4°, slacken bolts: 9, then retighten to 20Nm + 90 +/-4°, slacken bolts: 10, then retighten to 20Nm + 90 +/-4° |
|
| Spark plug Tightening torque | 25-35Nm |
|
| Engine oil with filter | 3.5l |
|
| Cooling system | 5.5l |
|
| Gearbox oil |
3.4l |
|
| Engine oil grade | CCMC G5 SAE 5W-40 |
| CCMC G5 SAE 5W-50 |
| CCMC G5 SAE 5W-30 |
| CCMC G5 SAE 10W-30 |
| CCMC G5 SAE 10W-40 |
| CCMC G5 SAE 10W-50 |
|
| Gearbox oil grade | Tranself TRX 80W |
|
| Brake fluid | DOT 4 |
|
| Timing belt | 120000km |
|
 |
| Tire dimension (x/y R z) | 145/70 R13 |
|
| Front wheel presure | 2.4bar |
|
| Rear wheel presure | 2.4bar |
|
| Wheel bolt tightening torque (B) | 90Nm |
|
| Front hub tightening torque (H) | 250Nm |
|
| Rear hub tightening torque (H) | 160Nm |
|
 |
| Minimal front brake disk thickness (R) | 10.5mm |
|
| Minimal front pad thickness (P) | 6.0mm |
|
