Service Repair Manual |
| Year | 1992-1999 |
|
| Engine code | 6G72 |
|
| Engine size | 2972ccm |
|
| Power | 210kw |
|
| Idle speed | 650-750rpm |
|
| Compression | 10.7bar |
|
| Fuel system | Mitsubishi MPI |
|
| Firing order | 1-2-3-4-5-6 |
|
| Spark plug | NGK PFR6J-11
Nippon Denso PK20PR-P11 |
|
| Electrode gap | 1.0-1.1mm |
|
| CO | 0.5% |
|
| CO2 | 14.5-16.0% |
|
| HC | 100ppm |
|
| O2 | 0.1-0.5% |
|
| CO content at increased idle speed | 0.3% |
|
| Increased idle speed for CO test | 2500-2800rpm |
|
| Lambda | 0.97-1.03 |
|
| Radiator cap | 0.75-1.05bar |
|
| Thermostat opens | 76.5℃ |
|
| Ventilator turn on | 81-89℃ |
|
| Battery | 50 / 52Ah |
|
| Alternator | 110A |
|
| Cylinder head tightening torque 1 | 60-70Nm |
|
| Cylinder head tightening torque 2 | 120-130Nm |
|
| Cylinder head tightening torque 3 | slacken bolts: 360° |
|
| Cylinder head tightening torque 4 | 60-70Nm |
|
| Cylinder head tightening torque 5 | 120-130Nm |
|
| Spark plug Tightening torque | 25Nm |
|
| Engine oil with filter | 4.3l |
|
| Cooling system | 8.0l |
|
| Gearbox oil |
2.4l |
|
| Automatic transmission fluid |
7.5l |
|
| Differential | 1.1l |
|
| Engine oil grade | API SG SAE 10W-30 |
| API SG / CD SAE 10W-30 |
|
| Gearbox oil grade | API GL-4 SAE 75W-85W |
| API GL-5 SAE 75W-85W |
|
| Automatic transmission fluid type | DIA ATF SP |
| Mitsubishi Plus ATF |
|
| Differential oil | API GL-5 SAE 90W |
|
| Brake fluid | DOT 3 |
|
| Timing belt | 96000km |
|
 |
| Tire dimension (x/y R z) | 225/50 R17 |
|
| Front wheel presure | 2.2bar |
|
| Rear wheel presure | 2.0bar |
|
| Wheel bolt tightening torque (B) | 120-140Nm |
|
| Front hub tightening torque (H) | 200-260Nm |
|
| Rear hub tightening torque (H) | 260-300Nm |
|
 |
| Minimal front brake disk thickness (R) | 28.4mm |
|
| Minimal rear brake disk thickness (R) | 18.4mm |
|
| Minimal front pad thickness without backing plate (P2) | 2.0mm |
|
| Minimal rear pad thickness without backing plate (P2) | 2.0mm |
|
