Service Repair Manual | |
| Year | 1994-1999 |
| Engine code | M41D17 |
| Engine size | 1665ccm |
| Power | 66kw |
| Idle speed | 745-895rpm |
| Compression | 20.0bar |
| Radiator cap | 1.4-1.6bar |
| Thermostat opens | 80℃ |
| Ventilator turn on | 90-96℃ |
| Battery | 50Ah |
| Alternator | 70A / AT = 80A |
| Cylinder head tightening sequence | |
 | |
| Cylinder head tightening torque 1 | 80Nm |
| Cylinder head tightening torque 2 | slacken bolts: 180° |
| Cylinder head tightening torque 3 | 50Nm |
| Cylinder head tightening torque 4 | 90°,90° |
| Cylinder head tightening torque 5 | run engine for: 25min., 90° |
| Spark plug Tightening torque | 30Nm |
| Engine oil with filter | 5.0l |
| Cooling system | 7.5l |
| Gearbox oil | 1.0l |
| Differential | 1.1l |
| Engine oil grade | ACEA B3-96 SAE 5W-30 |
| ACEA B3-96 SAE 15W-40 | |
| Gearbox oil grade | Orange label = ATF Dexron II D |
| Green label = Synthetic Mobil SCH630(BM) part No. 81-22-9-407-305 | |
| Yellow label = MTF-LT-1 / MTF-LT-2 No label = API GL-4 SAE 80 | |
| Differential oil | BMW SAF-XO BMW SAF-XLS |
| Brake fluid | DOT4 |
 | |
| Tire dimension (x/y R z) | 185/65 R15 |
| Front wheel presure | 2.0bar |
| Rear wheel presure | 2.3bar |
| Wheel bolt tightening torque (B) | 90-110Nm |
| Front hub tightening torque (H) | 290Nm |
| Rear hub tightening torque (H) | 250NmNm |
 | |
| Minimal front brake disk thickness (R) | 10.4 / 20.4mm |
| Minimal rear brake disk thickness (R) | 8.4 / 17.4mm |
| Minimal front pad thickness (P) | 3.0mm |
| Minimal rear pad thickness (P) | 3.0mm |
BMW E36 318tds (1665ccm) 1994-1999
Manufacturer | |
| BMW | |
Model | |
| E36 | |
Type | |
| 318tds | |
Year | |
| 1994-1999 | |
Engine code | |
| M41D17 | |
Engine size | |
| 1665ccm | |
Power | |
| 66kw | |
